How to Add an Extension to Your Nanoleaf Outdoor String LightsUpdated 21 days ago
Nanoleaf Outdoor String Lights can be extended up to 45m or 147ft. This guide will help you safely and effectively add a 15m (49ft) extension to your existing string lights setup. Follow the steps below to ensure a seamless setup.
Step 1: Unplug the String Lights from Power
Before adding the extension, ensure that your string lights are unplugged from the power source. This is crucial for your safety and to prevent any electrical issues.
Step 2: Unbox and Connect the Extension
Carefully unbox your 15m extension string lights.
Connect it to the end of the existing string lights.
Make sure the connector is firmly tight, ensuring a secure connection.
Step 3: Plug the Lights Back into Power
Once the extension is connected, plug the string lights back into the power outlet.
Step 4: Verify Full Illumination
Check the entire length of the string lights, including the extension, to make sure all sections are lit up. Control the lights using controller buttons to ensure that the lights respond correctly. If any section of the lights doesn’t work, unplug them and check the connections.
Step 5: Install the Extension as Desired
With the lights working properly, you can now install the extension in your desired location. Arrange the lights to your preference, making sure they are secure and well-distributed.
By following these steps, your string lights should now be successfully extended and ready to brighten up your space. If you are having an issue using your Nanoleaf Outdoor String Lights, reach out to Nanoleaf Support