How to Pair: Setting up Nanoleaf Lines on iOSUpdated 2 years ago
TIP: To pair before mounting, lay out the design for your Nanoleaf Lines on the floor or table and ensure that each Light Line is connected to a mounting connector.
Step 1:
Download the Nanoleaf Smarter Series App. When opening the app for the first time you will be prompted to create an account. This is used to connect to applications like Amazon Alexa, Google Assistant and IFTTT, but is not a mandatory step for setup otherwise.
Step 2:
Plug your Nanoleaf Lines into power, and wait for the startup cycle to finish.
You'll know it's finished once your Lines begin cycling through colors, and the light on the Processor is on and steady.Please note that the light on the Processor will begin to flash after 15 min after which you would need to perform another soft reset.
Step 3:
Press "Start Pairing" in the app. The "Add Accessory" window will appear to scan the HomeKit Setup Code (QR code). This code can be found on the postcard that came with your Lines on the back of the Processor, or on the back of your Power Supply. You can also enter your code manually.
Alternatively, Nanoleaf Lines can be paired through NFC pairing, by tapping your phone to the back of the Processor.
Note: NFC will need to be activated on your mobile device in order to use this feature. Only certain phones support NFC pairing
Step 4:
The app will begin searching for your Lines. When the pairing is complete the Lines will flash green.
Step 5:
Name your Lines, assign them to a specific room, or choose to include it in the list of Favorites in HomeKit.
Step 6:
The Setup Orientation screen will appear in order to confirm the orientation of your Lines with what is displayed on the screen. The LayoutDetect feature automatically detects how your Lines are connected to one another but you may need to rotate the layout on the screen. This ensures that the animations of your Scenes flow in the right directions!
Step 7:
Enjoy your Lines!