TIP: Lay out the design for your Nanoleaf Lines on the floor or table to ensure that each Light Line is connected to a mounting connector. First step: Download the Nanoleaf Smarter Series App, upon opening the first time you will be prompted to creat
First Step: Lay out the design for your Nanoleaf Lines on the floor or table to ensure that each Light Line is connected to a mounting connector. Download the Nanoleaf Smarter Series App, upon opening the first time you will be prompted to create a
The LED above the reset button on the processor, indicates whether your Lines are connected to WiFi or not. The four states of the power button LED are described below: Steady On: This indicates that the Lines are not connected to a WiFi network and
Your Nanoleaf Lines can only be connected to one WiFi network at a time. The following steps will reset your Lines so they can be configured onto a new network or reset to factory settings. This will reset WiFi and all pairing information.
The Power Supply included in your Lines Smarter Kit can support up to 18 Light Lines. Extending the layout above 18 Light Lines requires an additional Power Supply. You can extend your setup by adding the Processor and Power Supply from a second Line
9.4.2 (2024-03-11). - Fixed an issue where secondary Lines processor was not being detected as a new power supply.