Nanoleaf Helpdesk logo
Nanoleaf Helpdesk logo

All articles

Shapes Controller LEDs - What do the lights mean?Updated 3 years ago

The LED on the Power button on the Shapes Controller indicates whether your Shapes are connected to WiFi or not.

Here are what the 4 different states mean:

1. Steady On: Shapes are not connected to a WiFi network and are searching for a network.

2. Off: Shapes were able to successfully connect to a WiFi network.

3. Flashing (every ~1s): Shapes were not connected to a WiFi network within 30 minutes of being connected to power. 

To resolve this, unplug your Shapes from power and plug back in. After the boot up, the LED will change to On.

4. Flashing (every ~4s): Shapes were connected to a WiFi network, but are unable to reconnect. 

Generally this occurs if the settings on your router or WiFi have changed. To resolve this, perform a soft reset, and pair again.

Was this article helpful?
Yes
No