Sense+ Smart Wireless Switch

Info-filled and Troubleshooting articles for Nanoleaf’s innovative Sense+ Smart Wireless “Anywhere” Switch equipped with our exclusive Litewave technology.

Getting Started

We're so excited that you have added the Sense+ Smart Wireless Switch to your family of Nanoleaf products! Let's get you started with some quick links to the user manual:.

How-to: Enabling Bluetooth <> Switch

Nanoleaf Wireless Switch is a battery-operated device, but it's equipped to conserve the battery in many ways!. After a timeout period, Bluetooth is automatically switching off as one way to conserve the battery BUT in order to pair to the Nanoleaf A

How-to: Reset Guide

Sometimes your Sense+ Smart Wireless Switch may need a reset. Before you proceed, please note that this will erase all pairing and control group configuration information on the device. Once you're ready to proceed, here's how to reset your Nanoleaf

How-to: Pairing <> Switch [Android or iOS]

💡If you are setting up Nanoleaf Wireless Switch for the first time, please make sure the battery plastic guard has been pulled and that the battery is present. Make sure to enable Bluetooth on your device. Before you get started... 1. Updated App &

How-to: Enable Matter <> Switch

⚠️Matter functionality is currently in early access. Ensure your smart home ecosystem supports Matter and that your devices are compatible. Using Matter with your Switch allows you to use it to control or trigger other devices/routines in your smart

Maximum Number of Devices <> Switch

How many Nanoleaf Matter Essentials/Nanoleaf (panel/decor) devices can be grouped with the Sense+ Wireless Switch?. Great question!. Total Device ConnectionsYou may connect up to 100* lights to a Sense+ Wireless Switch. *Limits may vary based on your

Battery Replacement Indicator

The Nanoleaf Wireless Switch uses a CR2477 coin cell battery, which will drain over time with regular use. Here’s how to check if your battery is running low 🪫and a battery change is needed:. If you see either of these indicators, it's time to repla

Sense+ Motion Sensor Modes

There are three (3) motion sensor modes on the Sense+, and here's what each does:. ON | The Motion Sensor can be turned back on by pressing the ON or OFF buttons. The Sense+ Switch will flash green. PAUSED | The Motion Sensor can be temporarily pause

Troubleshooting: Lights on Different Channel

Riding the Litewave. It is crucial that the switch <> products are on the same channel. Here's what to do if your lights are on a different channel:. Steps to Check and Match Channels. Channel Adjustment. You'll need to reset and pair again to switch